- Introduction
Introduction
usage
Frigidi resistens TRADUCTOR funiculi ferrei cinguli aptae sunt ad deportandas materias foris in area congelatio, repositione frigida et etc.
Characteres
Productum funiculum ferro eligit ut cadaver. Flexilis operculum mixtionem NR et BR eligit, quae proprietates altae elasticitatis, resistentiae concussae, resistentiae frigidae, etc., sub condicionibus -60℃ regulariter operari potest.
Standard Specifications
| model | Tensile Strength（N/mm） | Funis Pix mm） | Funis Diameter mm） | Min Cover crassitudine mm） | Latitudo mm） |
| ST630 | 630 | 10 | 3 | 4 | 800-2400 |
| ST800 | 800 | 10 | 3.5 | 4 | |
| ST1000 | 1000 | 12 | 4 | 4 | |
| ST1250 | 1250 | 12 | 4.5 | 4 | |
| ST1600 | 1600 | 12 | 5 | 4 | |
| ST2000 | 2000 | 12 | 6 | 4 | |
| ST2500 | 2500 | 15 | 7.2 | 5 | |
| ST3150 | 3150 | 15 | 8.1 | 5.5 | |
| ST3500 | 3500 | 15 | 8.6 | 6 | |
| ST4000 | 4000 | 15 | 8.9 | 6.5 | |
| ST4500 | 4500 | 16 | 9.7 | 7 | |
| ST5000 | 5000 | 17 | 10.9 | 7.5 | |
| ST5400 | 5400 | 17 | 11.3 | 8 | |
| ST6300 | 6300 | 19.5 | 12.8 | 10 | |
| ST7000 | 7000 | 19.5 | 13.5 | 10 | |
| ST7500 | 7500 | 21 | 15 | 10 |
Nota: Crassitudo, funis, diametri, et pix funis fabricari possunt secundum exigentias Lorem.
Gradus operimentum
HG/T 3647-2014
| Grade | Tensile Strength（ISO37) Mpa | Elongation at break min. (ISO37) % | Abrasion max. (ISO4649) mm³ | ||
| H | 24 | 450 | 120 | ||
| D | 18 | 400 | 100 | ||
| L | 15 | 350 | 200 | ||
| Canus test（70℃×168h) Mutare rate distrahentes vires et elongationem ad intermissum % | ± 25 | ||||
| Frigus repugnans | Mutationem rate distrahentes vires% | C₁(-45℃) | ± 20 | ||
| C₂(-50℃) | ± 25 | ||||
| Mutatio rate elongationis intermissum% | C₁(-45℃) | ± 20 | |||
| C₂(-50℃) | ± 30 | ||||
| Nota: C₁：operantem siccus-45℃~45℃; C₂：operantes temperatus-50℃~45℃ | |||||
