- Introduction
Introduction
Usage
Abrasive resistant multi-ply textile conveyor belt usually uses high-strength fabric material as the core, such as polyester or nylon, the surface has good wear-resistant characteristics, can withstand the wear and scratch of the material, can carry large weight of the material, used in a variety of industries, such as mining, logistics, chemical industry and so on.
Characteristics
1. High abrasive resistant: It can effectively resist the friction and wear of the material and extend the service life.
2. Good bearing capacity: can withstand large material weight and tension.
3. Good stability: it is not easy to deviate or deform during operation.
Standard Specifications
Strength(KN/m) | No. Of Piles | Carcass Type | Belt Width |
300 | 2-4 | NN/EP | 500-2400mm |
400 | 2-4 | NN/EP | |
500 | 2-5 | NN/EP | |
630 | 3-6 | NN/EP | |
800 | 3-6 | NN/EP | |
1000 | 3-6 | NN/EP | |
1250 | 3-6 | NN/EP | |
1400 | 3-6 | NN/EP | |
1600 | 4-6 | NN/EP | |
2000 | 4-6 | NN/EP |
Note: It can be customized according to customers’ requirements.
Covers grades
In accordance with ISO14890-2013 standard
Grade | Tensile strength min. (ISO37) Mpa | Elongation at break (ISO37) % | Abrasion max. (ISO4649) mm³ |
H | 24 | 450 | 120 |
D | 18 | 400 | 100 |
L | 15 | 350 | 200 |
The values will help to determine the appropriate cover compound for the application or for the materials carries. Reliable assessment of the behavior of the covers in service for wear and cut resistance cannot be determined from tensile strength, and abrasion values alone.